Fire
Retardant Paints
Varnishes
& Clears
Primers
& Sealers
Fabric Coatings
Specialty Construction Products
Heat Resistant Coatings
Aircraft
Coatings
|
Download Info
Intro
to High Performance Industrial Heat Resistant Coatings
Coatings that Protect to 500°F
FC
No. 500 Series Heat Resistant Coatings |
Features |
Forms a tough, durable film which is heat, chemical and moisture vapor resistant |
Components |
One-component, specially modified epoxy ester resin coating |
Surfaces |
To be used on operating surfaces which will not exceed 500ºF (260ºC) |
Curing |
Coating air-dries by polymerization and oxidation |
Heat Req |
NONE |
Colors |
Available in 18 standard colors |
 
FC No. 555 Low VOC Heat Resistant Coatings – Low VOC version of FC 500
|
Coatings that protect to 850°F
FC
No. 850 Series Heat Resistant Coatings |
Features |
Exceptional heat resistant properties, excellent weathering characteristics and good corrosion protection |
Components |
Modified silicone-alkyd resin coating |
Surfaces |
To be used on operating surfaces which will not exceed 850 ºF (455ºC) |
Curing |
Air-dries with a unique curing mechanism combination off solvent evaporation and resin cross-linking |
Heat Req |
NONE |
Colors |
Available in 18 standard colors and 5 safety colors |
FC
No. 888 Low VOC Heat Resistant Coatings – Low VOC version of FC 850
|
Coatings that protect to 900°F
FC
No. 900 SA Series Heat Resistant Coatings |
Features |
With no saponifiable resins it is suitable for application over zinc-rich primers |
Components |
Formulated from a specially modified silicone acrylic resin and pure high-temperature pigment |
Surfaces |
To be used on operating surfaces which will not exceed 900 ºF (482ºC) |
Curing |
By solvent evaporation and polymerization |
Heat Req |
As low as 300ºF (149ºC) in sisteen hours or 400ºF (205ºC) in one hour |
Colors |
Available in 18 standard colors and 5 safety colors |
FC
No. 999 SA Low VOC Heat Resistant Coatings – Low VOC version of FC 900SA
|
Temperkote® Primers
TemperKote® Universal Primer |
Features |
The coating withstands severe thermal cyclic conditions to 1200ºF 649ºC). It is specially formulated to form a tenacious protective bond to a variety of metals, providing maximum corrosion protection under TemperKote® 600, 600HS and 1000 color stable topcoats |
Components |
100 % Silicone Resin |
Surfaces |
Metal surfaces, To be used on operating surfaces which will not exceed 1200ºF (649°C) |
Curing |
Air Dry |
| Heat Req |
None required for handling or shipping coated parts. Air dries in 24 hours. Cures in Service |
Colors |
Gray and Red Oxide |
|
TemperKote® Zinc Primer |
Features |
Two component primer designed to impart corrosion resistance in severe environments. It is specially formulated to form a tenacious protective bond to steel, providing maximum corrosion protection under TemperKote 600 and 1000 color stable topcoats |
Components |
100 % Silicone Resin |
Surfaces |
The primer withstands severe thermal cyclic conditions to 1000ºF |
Curing |
Air Dry |
| Heat Req |
Cures in Service |
Colors |
Gray |
|
TemperKote® CUI-HS |
Features |
The coating withstands severe thermal cyclic conditions to 1200ºF 649ºC), boiling water immersion and wet-dry-wet thermal cycling. It is specially formulated to form a tenacious protective bond to a variety of metals, providing maximum corrosion protection under various types of thermal insulation. TemperKote CUI-HS has the additional benefit of being formulated for application to Hot Surfaces. |
Components |
100 % Silicone Resin |
Surfaces |
Metal surfaces under thermal insulation, can be applied to metal exhibiting temperatures from ambient to 400ºF (204ºC) |
Curing |
Air Dry |
| Heat Req |
Cures in Service |
Colors |
Gray and Red Oxide |
|
Coatings that Protect to 600°F
TemperKote® No. 600 Series Heat Resistant Coatings |
Features |
Heat stable colors, suitable over Zinc rich primers. Forms tough, durable finish which is heat, moisture and chemical resistant |
Components |
Modified Silicone Acrylic |
Surfaces |
To be used on operating surfaces which will not exceed 600ºF |
Curing |
Ambient |
Heat Req |
NONE - Air Dry Coatings |
Colors |
9 + black, white, silver and 5 safety temperature stable colors |
|
Coatings for Hot Surfaces that Protect to 600°F
TemperKote® 600HS Series Hot Surface Heat Resistant Coatings |
Features |
Heat stable colors, suitable over Zinc rich primers. Forms tough, durable finish which is heat, moisture and chemical resistant. Can be applied to Hot Surfaces ranging from 120ºF - 300ºF (49ºC-156ºC). |
Components |
Modified Silicone Acrylic |
Surfaces |
To be used on operating surfaces which will not exceed 600ºF |
Curing |
Ambient |
Heat Req |
NONE - Air Dry Coatings |
Colors |
9 + black, white, silver and 5 safety temperature stable colors |
|
Coatings that Protect to 1000 °F
TemperKote® No. 1000 Series Heat Resistant Coatings |
Features |
Heat stable colors, suitable over Zinc rich primers. Forms tough, durable finish which is heat, moisture and chemical resistant |
Components |
100% Silicone Resin |
Surfaces |
To be used on operating surfaces which will not exceed 1000ºF |
Curing |
None required for handling or shipping coated parts. Air dries in 30 minutes |
Heat Req |
Cures in service |
Colors |
9 + black, white, silver and 5 safety temperature stable colors |
Also available in aerosol cans.
|
Coatings for Hot Surfaces that Protect to 1000 °F
TemperKote® 1000HS Series Heat Hot Surface Resistant Coatings |
Features |
Heat stable colors, suitable over Zinc rich primers. Forms tough, durable finish which is heat, moisture and chemical resistant. Can be applied to Hot Surfaces ranging from 250ºF - 500ºF (121ºC-260ºC). |
Components |
100% Silicone Resin |
Surfaces |
To be used on operating surfaces which will not exceed 1000ºF |
Curing |
Tacky until surface temperature reaches 250°F |
Heat Req |
Cures in service |
Colors |
9 + black, white, silver and 5 safety temperature stable colors |
TemperKote® 1000HS Special Gray Primer
|
Coatings that protect to 1200°F
FC
No. 1200 MSF Series Heat Resistant Coatings |
Features |
A high performance coating, exceeding the performance requirements of Federal Specification No. TT-P-28 |
Components |
Modified Silicone resin coating, fortified with ceramics |
Surfaces |
To be used on operating surfaces which will not exceed 1200 ºF (649ºC) |
Curing |
By solvent evaporation, polymerization and subsequently by the fusion of the ceramics |
Heat Req |
For ultimate hardness heat cure for 1 hour @ 350°F |
Colors |
Black and silver |
FC
No. 1212 MSF Low VOC Heat Resistant Coatings – Low VOC version of FC 1200
|
Coatings that protect to 1500°F
FC
No. 1515 Low VOC Series Heat Resistant Coatings |
Components |
Pure silicone resin with special ceramic colorants and additions |
Surfaces |
To be used on operating surfaces which will not exceed 1500ºF (815ºC) |
Curing |
By catalyzation, polymerization, and by fusion and complexing of the metallic and ceramics |
Heat Req |
450ºF (232ºC) for a minimum of one hour |
Colors |
Available in 9 standard colors |
|
Fast Dry Coatings that protect to 450°C (842°F)
FC
No. 450C Series Heat Resistant Coatings |
Features |
Developed specifically for application by OEM of exhaust and muffler systems. Develops excellent adhesion to bare and aluminized low carbon steel and 409 stainless. Excellent corrosion resistance |
Components |
Pure silicone resin with special ceramic colorants and additives |
Surfaces |
Withstands severe thermal shocks, repeated heat cycling to 842 ºF (450ºC) and water quenching. For use on automobiles, trucks, tractors, heavy equipment, farm implements, utility engines, etc. |
Heat Req |
Dries quickly at ambient temperature or can be force dried at 225ºF (107ºC) to 250ºF (121ºC) for 15 minutes |
Colors |
FLAT BLACK ONLY |
|
Water Based Coatings that protect to 450°F
TemperKote® H20 |
Features |
Water based coating that forms a tough, durable, heat resistant film
Components: Silicone modified latex |
Components |
Silicone modified latex |
Surfaces |
To be used on operating surfaces which will not exceed 450ºF (232ºC) |
Curing |
Air Dry |
| Heat Req |
NONE |
Colors |
14 standard pastel colors + white and black |
TemperKote® H20 Primer
|
Flame Control Heat Resistance Charts
500 & 555, Air Dry series films will withstand service temperatures up to 500°F (260°C). Above indicated maximum temperatures for color stability, a significant color change will occur. This color change is not reversible.
850 & 888, Air Dry series films will withstand service temps up 850° F, (455°C).
900SA & 999SA, Heat Cured series films will withstand service temps of 900°F, (482°C). For (*) colors of the 850, 888, 900 and 999 series, during the initial heating cycle, there will be significant darkening above the indicated maximum temperature for color stability. As the temperature increases above 650°F (343°C), the color will lighten to more closely resemble the original color, and will not appreciably change on cooling and reheating. If the surface temperature never exceeds 650°F (343°C), the color will remain considerably off color.
** White, Off White, Oyster White, Pompon Yellow, Lime, Cream, Aqua, Misty Blue, Blue Water
*** Warm Green, Silver Gray, Medium Gray, Adobe, Soft Beige, Peach
BACK
Consult Flame Control product information sheets for specific heat resistance of each color in
the desired product series.
High Heat® • VOC Compliant
Industrial • Heat Resistant
Standard Safety Colors
BACK
|
